HERCULES F10 is a single-component cement-based premix, usable internal
and external for leveling and smoothing new or existing substrates, in thicknesses from 2 to 20 mm. Mixed with water only, HERCULES F10 develops excellent fluidity and self-leveling capacity and after hardening it has excellent adhesion to the support and a surface with excellent mechanical characteristics such as resistance to compression, bending, imprint and abrasion.
In the absence of special aesthetic requirements, HERCULES F10 can be left exposed as a finished floor and can be walked on (even outdoors). In case of transit of trolleys or vehicles HERCULES F10 must be covered with suitable flooring.
HERCULES F10 can also be used on heated substrates and is suitable for receiving any type of coating: ceramics, parquet, and resilient products and textile.
HERCULES F10 is particularly recommended for use in areas where high resistance to static and dynamic loads is required.
Thanks to its special formulation and good resistance to moisture, HERCULES F10 may also be used for external applications or on substrates that are not completely dry or which have a high level of residual moisture.

• Mixing ratio: about 20% (about 5.0 -5.5 liters per 25kg bag)
• Applicable thickness: from 2 to 20 mm
• Workability time/Pot life: 35-50 minutes *
• Setting start time: 55-85 minutes *
• Walkability time/ set to light foot traffic: 8 - 12 hours *
• Waiting time before subsequent bonding: ceramics 24 hours, parquet 4 days
• Application temperature range: from +5 to + 35°C

* depending on the temperatures and thicknesses made.